Getting Started with Nexia

In order to help our customers better understand how to use the different Nexia devices, we’d like to give you some information about how to get started. To communicate with your Nexia device, you will first need to download and install the Nexia software. This is freely available on our website, and can be found at the bottom of our Nexia downloads page. The current version is Nexia Software V3.3. (If your device was purchased prior to July 2013, you will also want to download the most recent version of firmware, available at the same link.) The Nexia device will need to be powered on and connected to the same…

What If There Were a Social Networking + CAD Tool?

Wouldn’t it be great if product development teams could collaborate in real-time with a social networking-like tool? And what if it were connected to CAD, so that any member of the team could easily call out certain components on a drawing for discussion? This idea occurred to me after learning about the SolidWorks package that implements something similar within their tool. But I’m not talking about a tool that allows you to add manufacturer specs to a computer-generated document creator. I’m talking about a tool that could be connected to CAD (not within), and allow for instant messaging and the instant sharing of all product development documents, including exploded assembly…

Why Queensland University of Technology Installed Tesira in Science and Engineering Centre: the Video Case Study

With its emphasis on courses and research, Queensland University of Technology (QUT) is one of Australia’s leading universities. As part of its’ new $230 million Science and Engineering Centre at the Gardens Point campus, the Cube is the heart of the facility. Part science lab, part digital engagement, the Cube will be the hub of scientific exploration for high school students, the QUT community, and the wider public. Biamp’s Tesira platform is the DSP behind this amazing installation. Watch the video case study to learn more about it. http://www.youtube.com/watch?v=MeTbzsIAyvk

Here’s What a Conference Room Could Look Like with TesiraFORTE

Whether your conference room is small or large, you no longer have to yell into a phone at the center of the table to be heard. The TesiraFORTÉ CI digital signal processor enables you to comfortably run a meeting that is clear, collaborative, and efficient. Built for direct integration with soft codec conferencing technologies like Lync, Skype, and WebEx, this solution also leverages our AEC technology to create a clean, clear audio experience that leaves everyone on the call feeling heard. Conference Room System Design Guide Conference Room System Layout The needs of each conference room will vary, so here are three different systems under three different conditions: 1) Adding…

Contact Us.

Our sales and support teams are ready to help.
Contact us today.

LinkedIn
Share
Twitter
Facebook